
Side Entry Agitator: Series 100
The Mixquip® Series 100 side entry agitator is an innovative approach to side entry mixing and incorporates state-of-the-art technology in agitator design and construction using composite materials resulting in improved efficiency, greater reduction in power consumption and lower shear. This series achieves as much as 65% greater blending capacity. They are cost effective, energy efficient and quiet in operation. The Mixquip® Series 100 Side Entry Agitator is ideally suited to fluids of medium to low viscosity where gentle low shear mixing or blending is required. Mixing or blending of large volumes of liquid can also be achieved using Mixquip® Series 100 Side Entry Agitators that are smaller in size and more economical than other mixing arrangements that perform similar duties.
Advantages
- Efficient mixing or blending to stored products
Mixquip’s Series 100 agitator has been carefully designed to maximise the efficiency of mixing. Our mixer options for the Series 100 include the most efficient designs available with the highest degree of mix in the shortest time whilst keeping energy consumption low.
- Excellent Liquid Movement
Excellent liquid movement past in-tank heat transfer surfaces such as coils, tank jackets and spears that reduce ice build-up or fouling.
- Prevents the settling or layering of stored products
- Easy Step-by-Step Removeable Seal
Easy step-by-step removable seal reducing downtime in servicing the seal. The seal is removed and replaced while holding liquid in the tank resulting in no need for product transfer, no lost product, and a safer procedure.
- Hygienic Design
Hygienic design, by placing the mechanical seal within the wash zone of the tanks fitted with CIP.
- Impeller Options
Mixquip provide a wide range of impeller options with their own in-house designs to suit exact requirements of a mixing process. The Superflo impeller incorporates technology designed using computational fluid dynamics providing the optimal results for low shear mixing with a powerful axial pumping stream.
- Angular Spacer Housing
The angular spacer housing designed and developed by Mixquip, provides flexibility by rotating the flange faces to provide optimum mixing conditions in various tank designs and configurations.
Mixer Options
Australian made quality mixers that can be used to blend and mix any liquids. Mixquip Base Entry agitators are available in multiple configurations including right-angled gearbox and inline with both hygienic mechanical seals and or water flush seals.
- Direct Drive
High-speed direct drive mixer suitable for low viscosity fluids.
- Gear Drive
Slow-speed gear drive mixer suitable for all range of viscosities.
- Seals
Hygienic Mechanical Seals or Water Flush Seals
- Variable Speed
Both direct drive and gear drive units are available with variable speed drives for 240V, single phase and 415V, three phase.
- Choice of Impeller Design
Range of impellor designs ensure your exact requirements can be met.
- Flameproof Option
Enables easy mixing of liquids in hazardous and volatile areas.
- Pneumatic Motor
Converting compressed air energy into mechanical work, these motors are very flexible as the speed can be adjusted by varying the air supply volume relative to your needs.

Applications
The Series 100 are effective at mixing or blending additives to stored product. Excellent liquid movement past in-tank heat transfer surfaces such as coils, tank jackets and spears, reducing ice build-up or fouling. Prevents the settling or layering of stored products. Ideal for the processing of wine, milk, cream, lactose, vegetable oil, juice, detergents, shampoo etc.
