Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Quote Request Shop Online
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Shop Online

Agitator Mixer Tanks Base Entry Agitator – Series 500

Bottom Entry Mixing
Home » Base Entry Agitator – Series 500

Bottom Entry Agitator: Series 500

Mixquip’s range of Series 500 low shear base entry agitators are designed to fit into the bottom or base of a mixing vessel. These high shear mixers are typically used in conjunction with a slow speed anchor stirrer or scraper unit for high viscosity products. The Mixquip® base entry agitator mixer gives high shear homogenization while the stirrer/scraper distributes the homogenized output uniformly through the vessel. This is ideal for high viscosity cosmetic, pharmaceutical and food products. Base Entry mixers can also be used by themselves on low viscosity products and to wet out powders.

Advantages

Suspends Sediments

Base Entry Agitators are ideal for mixing products where solids or higher SG liquids settle in the bottom of the tank. Mixquip Series 500 Agitators provide a powerful axial flow up through the tank contents.

Ease of access

Series 500 Agitators provide floor level access, ideal for servicing.

Cost-effective

Lower the costs of the process when mixing a tank 1/2 or 1/3 full as a short shaft means a lower cost than Top Entry Mixers.

Hygienic Design

CIP design, simple and easy to clean the agitator. All wetted parts are in 316 stainless steel.

Detailed Construction

Series 500 base entry mixers are constructed from a wide variety of special alloy materials which include modular investment castings to suit many and varied applications and individual process environments. 

Modular Design

From concept through to manufacture, allowing you to achieve the ideal mixing solution for optimum performance and providing maximum return on investment. 

Mixer Options

Australian made quality mixers that can be used to blend and mix any liquids of viscosities up 15,000 cPs. Mixquip Base Entry agitators are available in multiple configurations including right-angled gearbox and inline with both hygienic mechanical seals and or water flush seals.

Direct Drive

High-speed direct drive mixer suitable for low viscosity fluids.

Gear Drive

Slow-speed gear drive mixer suitable for all range of viscosities.

Variable Speed

Both direct drive and gear drive units are available with variable speed drives for 240V, single phase and 415V, three phase.

Seals

Hygienic Mechanical Seals or Water Flush Seals.

Choice of Impeller Design

Range of impellor designs ensure your exact requirements can be met. 

Flameproof Option

Enables easy mixing of liquids in hazardous and volatile areas. 

Pneumatic Motor

Converting compressed air energy into mechanical work, these motors are very flexible as the speed can be adjusted by varying the air supply volume relative to your needs. 

Applications

These state-of-the-art agitators achieve the optimum mixing conditions in open or closed top Vessels. Blending liquids and powders, suspensions, cold stabilising, emulsifications plus many other duties which are achievable by drawing on know-how and unique impeller designs and sealing solutions for base entry agitators.

Technical Information

Download Brochure Information

Series 500 – Bottom Entry Mixer

X

Request a call back from an Engineer

Request A Call Back From An Engineer